Breezaire WKSL 2200 Wine Cellar Cooling Unit

Keep Your Beloved Beverages Protected Brilliantly With WKSL 2200 Wine Cellar Cooling Unit By BREEZAIRE

When our self-contained series will not meet your needs then the Breezaire WKSL 2200 Wine Cellar Cooling Unit split design will provide the flexibility needed to create an ideal installation or deal with unusual site problems.

The Breezaire WKSL 2200 Wine Cellar Cooling Unit is special split systems that allow mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 50 feet away. Breezaire WKSL 2200 Wine Cellar Cooling Unit systems are designed to, when installed in a properly constructed enclosure provide a constant selectable temperature between 48° and 63° Fahrenheit while maintaining 50 to 75 percent relative humidity.

WKSL Series systems are designed for easy installation by any, properly equipped and qualified air conditioning or refrigeration service technician. Two copper tubes and low voltage wiring connect the two modules and power is hard wired to the units using adequately sized 110 AC volt electrical sources. These systems must be charged with refrigerant during installation. The WKSL series uses the Sentry III+ digital control system for complete control of the enclosure conditions.

All BREEZAIRE cooling systems are specialized designs that create the kind of carefully controlled environment demanded by products that are highly sensitive to changes in temperature and humidity. They are not intended for use in standard refrigeration applications. For assistance in specifying the best system for your unique requirements and in creating the ideal storage environment, contact your authorized dealer.

WKSL Series Wine Cellar Cooling Unit (Sentry III+) Control System Features

• Large, easy to read, green LED display
• Accurate, easy to adjust, readable set points with continuous reading of enclosure temperature or displaying of set point when changing enclosure temperatures.
• Power outage protection, which delays units start up after power outages.
• Blocked airflow protection, which shuts down the unit and protects your wine in case of high temperatures caused by condenser blockage.
• Controls temperature by enclosure air sensors or optional bottle probe.
• Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source

Other Breezaire  WKSL 2200 Features

• WKSL includes Fan/Coil & Condenser

Fan/Coil Specifications

• Enclosure Volume (max):  265 cu.ft.
• Electrical: 1 Amp

Condenser Specifications

• Enclosure Volume (max):  265 cu.ft.
• Electrical: 4 Amp

Fan/Coil Dimensions (in): 14.25W x 14.125H x 7.75D 25 lb.
Condenser Dimensions (in): 14.25W x 14.125H x 11.00D
Fan/Coil Weight: 25 lb.
Condenser Weight: 35 lb.

Breezaire WKSL Wine Cellar Cooling Unit Installation Instructions